飞机附件全寿命监控系统的建立及应用

作为飞机全寿命周期管理的重要组成部分,附件全寿命监控系统主要由附件信息查询、附件不正常事件查询以及附件全寿命链路图模块组成,采集、管理、处理飞机附件的使用过程参数,可为量化飞机附件性能和制定附件维修方案提供支持。其中,提出了使用附件链路图法快速分辨附件性能的方法,并在厦航飞机全寿命管理中已获得广泛使用。     

基于Matlab Simulink的弹道仿真方法

弹道仿真软件有助于飞航导弹武器飞行试验结果的分析与评定。为此,设计了基于Matlab Simulink的弹道仿真计算方法,建立了六自由度空间弹道数学模型,利用导弹相关的气动数据和控制参数测试了算法,实现了软件,仿真结果证明了该模型的准确性和可信度。     

航天电子产品金属晶须形成机理、危害及抑制措施分析

金属晶须自发生长是材料科学中长期受到关注的科学现象.随着航天电子产品集成度的提高,由金属晶须自发生长引起的短路和电子故障问题对航天电子产品的可靠性构成了潜在的威胁.因此,研究金属晶须的生长规律,分析金属晶须的生长机理,探寻抑制金属晶须生长的技术手段成为当前研究的热点.针对近年来国内外对金属晶须生长现象的一些相关研究进行了分析,主要包括金属晶须的生长行为、各种影响金属晶须生长的因素、解释锡晶须生长机理的理论等.结合航天型号金属晶须生长导致的故障,对晶须危害进行了分析,并提出了金属晶须抑制的常用措施.     

无刷直流电机霍尔传感器安装方法研究

针对有位置传感器的无刷直流电机需要位置传感器提供换相信号的问题, 提出了基于磁势确定霍尔传感器安装位置的方法。霍尔传感器通过检测转子磁势确定转 子位置,产生传感器信号控制定子绕组换相,使得定、转子磁势相位差在60°~120°之间 波动,从而使电机输出最大力矩。通过实验测得使用该方法进行霍尔传感器位置安装的 无刷直流电机的输出力矩波形与理论一致,从而验证了此方法正确可行。     

基于连续同伦算法的天基仅测角初定轨方法

要进一步提高天基短弧初定轨的精度,在观测资料精度较高的情况下,仅考虑二体问题是不够的,还应考虑轨道摄动的影响。因此,基于无摄初轨的单位矢量法原理和矢量斜分解方法,给出了考虑摄动的天基仅测角初定轨单位矢量法。针对天基仅测角观测条件方程组求解过程中易出现迭代不收敛或收敛到平凡解的问题,引入连续同伦算法求解观测条件方程组,提出了单星观测方式下的空间目标天基仅测角初定轨方法,并通过数值仿真算例验证了该算法在较大范围的收敛性和数值稳定性。     

民用飞机静气动弹性载荷计算方法研究

以某大型客机为例,根据气动外形利用有限元软件PANTRAN建立高阶气动面元,利用ZONAIR静气动弹性方法,分析了其弹性载荷,包含气动力系数、过载、迎角,并与刚性载荷进行了对比。此方法合理可靠,可用于民用飞机的弹性载荷设计分析。     

飞机静力试验中机翼的载荷分配研究

针对飞机静力试验加载的问题,为使得试验加载力反映飞机受力特性,由载荷分配前输入的典型剖面上剪力、弯矩、扭矩推导出相邻剖面之间的剪力、弯矩、扭矩,通过构造带内力约束的拉格朗日极值函数求出试验加载力,将载荷分配前输入的内力与试验载荷分配后产生的内力进行对比分析,可以得出:通过构造带内力约束的拉格拉日极值函数法分配得到的试验载荷符合载荷的传递,能够满足飞机静力试验加载的要求,可以用于飞机静力试验的加载。     

Is the phenology-based algorithm for mapping deciduous rubber plantations applicable in an emerging region of northern Laos?

Updated information of rubber plantations is essential for assessing socioeconomic and environmental impacts, especially in the emerging region of northern tropics. Here, a phenological method was modified to detect rubber plantations using Landsat Operational Land Imager (OLI) imagery in Phongsaly Province of northern Laos, where it begun a rubber boom in the mid-2000s due to geo-economic cooperation. It highlighted the landscape and pixel differences of deciduous rubber plantations in the tri-temporal phases (i.e., pre-defoliation, defoliation, and foliation) during the dry season due to phenological changes. Six commonly used vegetation indices (VIs), including the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Land Surface Water Index (LSWI), Atmospherically Resistant Vegetation Index (ARVI), Normalized Burn Ratio (NBR and NBR2) derived from OLI imagery during 2013–2016 were compared to determine the most suitable VI for discriminating the phenological differences of rubber plantations from natural forests. Then, the Differences of Normalized Burn Ratio (DNBR) was applied to generate the 30 m map of rubber plantations in 2016, by combining two masks of Landsat-derived forest and suitable elevation for rubber trees cultivation. The resultant map of rubber plantations had a classification accuracy of 93.7% and the Kappa coefficient of 0.848. Our study demonstrated the usefulness of the Landsat-derived tri-temporal phenological DNBR approach in an emerging region of northern Laos, despite requiring more scenes compared with single- and double temporal window methods.     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

越肩发射反导拦截弹复合制导律研究

研究了优化反导拦截弹的越肩发射制导律,实现了对尾追目标的拦截,采用伪谱法和滑膜变结构理论设计了全弹道复合制导规律。利用Radau伪谱法求解以转弯时间最优为指标泛函的最佳转弯规律,通过曲线拟合给出了初制导转弯段的过载指令。选择零控脱靶量作为滑动模态对末制导律进行设计;利用这两种制导律的加速度指令构造了交接班导引律实现弹道的平滑。最后,对载机越肩发射反导拦截弹拦截来袭导弹的反导场景进行了数字仿真,结果表明所设计的复合制导律能够完成反导拦截任务。